m menu image  m home m cart
Walltastic - Instructions how to apply wall mural using wallpaper paste
Walltastic - Instructions how to apply wall mural using wallpaper paste

Walltastic - Instructions how to apply wall mural using wallpaper paste

Add to Cart:



Details

  • Manufactured by: SmartPlatyPus.com

Description

INSTRUCTIONS FOR APPLYING WITH WALLPAPER PASTE:

BEFORE YOU START:

  • Your wallpaper mural comes in 12 panels.
  • We make every effort to deliver a top quality product in perfect condition, by applying strict quality control procedures.
  • Before applying paste, lay out your Walltastic mural to ensure that you are happy with the print and colour match and that it fits together correctly.
  • If any defects are found please contact your supplier immediately.
  • We do not offer exchanges or refunds once you have hung any part of your mural.
  • Walltastic takes no responsibility for any damage caused to your mural after it has been delivered or during hanging.

INSTALLING THE PANELS:

  • Follow the manufacturers instructions on the order of panel installation.
  • Do not wait too long between installation of each panel or the panel designs will not line up correctly.
  • Be prepared to proceed with each panel until the job is done before taking a break.
  • Since the placement of the first panel determines the overall look of the finished mural, take extra time and care to place it accurately.
  • To mark the position of the first panel, draw vertical lines on the wall using a pencil, a level and a plumbline.

INSTRUCTIONS:

1. Select panel number 1

2.Lay panel face down on a flat surface. Apply the wallpaper paste evenly to the back of the panel allow the paste on all panels to soak for 1 - 2 minutes, do not lay the pasted sheets on top of each other and do not fold the pasted panel. It is very important to take extra care to make sure paste is applied to the edges. Try not to get paste on the printed side, hang the wallcovering without overlap. Apply the panel on to the wall using a soft cloth. Work from top to bottom and from centre to the edges.

3. Carefully remove excess paste from the front of the mural using a soft cloth. Too much rubbing or cleaning will remove the ink from the paper.

4. Repeat steps for panels 2 to 12, it is common for each panel of a wet mural to be 1.25cm larger than a dry mural as each panel expands once paste is applied.

5. Trim the excess edges carefully after the paper has dried.